Estable Living
1 / 5
Ensure immediate and effective emergency guidance with our Auto Light-Sensing Emergency Detour Warning and Safety Guidance Control System. Designed for critical situations, its 52 high-brightness LEDs, coupled with an automatic brightness sensor, guarantee optimal visibility and continuous warning for 12 or 24 hours, day or night.
The synchronization signal is transmitted via cable from the "out" connector of the previous light to the "in" connector of the next one to ensure uniform flashing patterns.
This system can be used in conjunction with reflective traffic panels for maximum visibility. Manufactured from UV-stabilized HDPE through blow molding with protective rims.
CE Compliance: Meets EMC Directive 2014/30/EU and standard EN IEC 55015:2019. Ensuring safety, electromagnetic compatibility, and environmental protection.
Safety Tips: This light features reverse polarity protection (will not light if +/- is reversed). Always ensure the power is off during installation. Keep cables away from sharp edges and moisture.
A: The standard system configuration includes 1 main controller unit and 3 follower units (slave lights), creating a 4-in-1 setup.
A: Yes, it features an automatic light sensor that detects ambient light levels to activate the system for 12h or 24h operation modes.
A: The system supports both Synchronous Flashing (all lights flash at once) and Sequential Flashing (lights flash in order to guide traffic).
A: Each unit comes with a standard 5-meter connecting cable, allowing flexible positioning around hazards or lane changes.
A: Yes, the system is designed for a 12V DC input, making it compatible with most vehicle and portable power sources used in traffic control.
A: Yes, the modular master-slave design allows for customization into 4-in-1 or 5-in-1 setups depending on your specific safety requirements.
